Charging Pile Instructions-V2.0
22
reserved time of the next day by default. If the duration time is set as '0', the charging
process will be controlled by vehicle BMS and vehicle will be fully charged
automatically.
➢
Ration Charging Mode: Manually set the electricity quantity needed. When the set
electricity quantity reached, the charging process will be stopped.
➢
SOC Charging Mode: Manually set the SOC value. When the set SOC value reached,
the charging process will be stopped automatically. If the set SOC value is smaller than
the actual vehicle SOC value, charging pile will stop immediately.
If automatic charging mode be chose, system will enter vehicle connector choosing page.
After connector chose, the charging process will begin. See figure 9.3.1.3
Figure 9.3.1.3
If reservation charging mode chose, system will enter charging start time and duration time
setting page. See figure 9.3.1.4. After relevant parameters setting finished, click “next” to
enter vehicle connector choosing page just as figure 9.3.1.3.
