Charging Pile Instructions-V2.0
21
Start by APP: Click the [QR code charging] button at the lower right corner of the main
interface, and the interface pop-up box will be shown in figure 9.3.1.2.
Open the relevant charging APP of the mobile phone and scan the QR code
corresponding to position scrambling on the left and right sides of the screen, and click
[start charging] on the APP. The interface will directly jump to the charging information
display interface, as shown in figure 9.3.1.11 below.
Opening method of QR code function: enter the setting interface -- function setting – QR
code function, and select "yes".
Figure 9.3.1.2 (For APP user)
3.
Charging Mode Selection
Following step 2, after entering the homepage, four kinds of different charging modes could
be chose.
➢
Automatic Charging Mode: The charging pile will be communicated with vehicle
on-board BMS and the whole charging process and charging time will be controlled
by BMS.
➢
Reservation Charging Mode: Manually set the charging start time and duration time.
When the well set start time reached, charging pile will start charging automatically.
When the set duration time reached, charging process will be stopped automatically. If
the reserved start time is prior at the current time, charging pile will start charging at the
