12
Maintenance, Cleaning, Storage, Transportation
1.Clean the device with a damp towel and wipe dry with a soft cloth.
2.Place the device inside the packaging box provided during storage or travelling.
3.This device should be stored in an area that is dry, well ventilated, and non-corrosive.
Device should be placed no less than 250mm away from the floor, and the maximum
number of layers on top of it should not be more than 5.
4.This device should be packed and stored properly if it is to be left unused for a long
period of time. In such circumstances, the device should be recharged once every 6
months.
5.This device can be transported by car, train, sea, or air.
6.During transportation, this device should be gently handled and well-secured in an
upright position to avoid damage due to strong vibration, collision, rolling or falling.
Water-proofing measures should also be in place.
Name of parts
Hazardous and noxious substances
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB)
(PBDE)
Shell
0
0
0
0
0
0
Circuit board
assembly
X
0
0
0
0
0
Metal parts
0
0
0
0
0
0
Rubber parts
0
0
0
0
0
0
Adapter
X
0
0
0
0
0
Connecting line
0
0
0
0
0
0
Handlebar grip
0
0
0
0
0
0
This table has been compiled in accordance with 5J/T 11364
: Circuit board assembly consists of parts of printed circuit board
machine, such as resistors, capacitors, integrated circuits, connectors.
0: It means that the content of hazardous substances contained in homogeneous
materials of this device is within the limit specified in GB/T26572.
X : It means that the content of hazardous substances contained in some homogeneous
material of this device is beyond the limit specified in GB/T26572.
