10
2. Battery capacity is " 0 "
When the battery is out of power, if the user does not charge it for a long time, the
battery will initiate low-battery protection, collectively referred to as over discharge
protection.
The fascia gun cannot work normally if it is started at this time.
Solution:
Keep the fascia gun off, then connect the charger (power adapter), and the fascia gun
will automatically enter the charging state. When it is fully charged, unplug the charger,
and the fascia gun can work normally.
Charging failure
1. High fascia gun temperature:
When the temperature of the fascia gun body is too high, it cannot be charged when it is
connected to the charger.
Solution:
Place the fascia gun in an environment below 40°C for 2h before charging.
2. High charger temperature:
When the fascia gun is charged in the environment above 40°C, the power adapter may
trigger overheating protection, thus causing normal charging failure of the fascia gun.
Solution:
Place the fascia gun in an environment below 40°C for 2h before charging.
