60
Click any
Area
1/2/3
button first, and then draw an area on the preview
image screen with mouse. Click
Save
to apply settings and create the mask.
Click
Area 1/2/3
button again, and click
Save
to discard the masked area
previously set.
C. Image Setting
a. Brightness / Contrast / Hue / Sharpness:
Different values can be
adjusted here.
b. D-WDR:
It enables the camera to reduce the contrast in the view to
avoid dark zones as a result of over & under exposure.
c. Denoise 3D & 2D:
Filter the noise and blur from the image and show
a clearer view. You can set the values for
3D & 2D
filters.
d. AGC:
The sensitivity of the camera can be adjusted according to its
environmental lighting. Enable this function to get brighter images on
low light, but the level of noise may also increase.
e. Shutter Time:
Choose the location of your camera or a fixed shutter
time. The shorter the shutter time is the less light the camera
receives and the image becomes darker.
Note:
When you select a number in
Shutter Time
, the shutter time
will vary in a range and be controlled by camera automatically. The
following table shows the shutter time options and corresponding
range.
Summary of Contents for YUC-KH26
