93
If you forget your password, please follow the steps to set back the IP
Camera to its default value.
•
Remove the power and Ethernet cable. Open the dome and press
and hold the button as shown in the picture below.
•
Connect the power back to the camera, and do not release the button
during the system booting. It will take around 30 seconds to boot the
camera.
•
Release the button when the camera finishes booting.
•
Plug-in the Ethernet cable. Re-login the camera using the default IP
(
http://192.168.1.200
), and user name:
admin
, password:
admin
.
viii. Factory Default
Summary of Contents for YUC-KH26
