79
Restart IP Camera Automatically:
Set up the time for IP camera to
restart automatically after ticking
Restart
to enable access.
3.
I/O Setting
(Options for Out1 is only available for I/O configured models)
A. Input Setting:
The IP Cam supports input and output. When the input
condition is triggered, it can trigger the relay; send the video to mail
addresses/FTP server/SAMBA.
• Interval: For example, if you select "10 sec" here, once the motion is
detected and action is triggered, it cannot be triggered again within 10
seconds.
• Based on the schedule: When the option box is ticked, only during
the selected schedule time the I/O is enabled. For example, the 11th
hour of Monday has not been colored in the schedule table, then no
action will be triggered even if the camera detects input signal during
11:00~12:00 on Monday.
B. Output Setting:
The output mode affects the DO or relay out duration.
Mode Setting
Summary of Contents for YUC-KH26
