YT Industries RTFM JEFFSY, Read Before Use

Page: 36 / 64

3 6 y t
I
I I II
II
II
II
I
I
I I I II
II
II
I I
PEDAL ASSEMBLY SRAM BRAKE SWAP
a //
Unscrew the brake lever clamps (Torx T25) and
remove the attachments of the brake and shift cables.
b // Swap the brake levers to have the front brake on
your right and the rear brake on your left side.
c //
Mount the brake levers on your handlebar with
the brake lever clamps. Make sure the clamp and the
break fit neatly into another and to leave no gap (zero
gap).
d //
Make sure the levers are correctly aligned and
tighten them with a torque wrench (5 – 6 Nm for
aluminum bars; 2,8 – 3,4 Nm for carbon bars).
a //
Attach the pedals to the cranks using an allen wrench.
Apply some grease to the threads to ensure perfect
functioning. Please note that there’s a right and a left
pedal.
b // The non-drive side pedal has reverse threading and
is therefore tightened counterclockwise. Tighten the
pedals with a torque of 38 Nm.
a
b
A B
C D