y t
1 3
7.1 a //
Schraube die Schnellspannachse aus der Feder-
gabel und ziehe sie heraus.
7.1 b //
Setze das Vorderrad in die Federgabel ein. Achte
dabei darauf, die Bremsscheibe vorsichtig in den Brems-
sattel zu schieben, um eine Beschädigung zu verhindern.
7.1 C //
Bei FOX-Gabeln wird die Vorderradachse von
der Nichtantriebsseite aus eingeführt, bei RockShox-
Gabeln von der Antriebsseite. Führe die leicht gefettete
Achse ein, bis es nicht mehr weiter geht. Danach kannst
du sie im Uhrzeigersinn einschrauben.
7.1 D //
Schließe den Schnellspanner handfest und paral-
lel zur Gabel, um einen festen Sitz des Vorderrads
zu gewährleisten. Der Mechanismus kommt vor-
eingestellt, legst du den Hebel parallel zum Tauchrohr
an, ist das Rad gesichert. Beachte auch das Hersteller-
manual.
DE
7
VORDERRADEINBAU – FOX 34 ROCKSHOX PIKE
a c h t u n g !
Luftgefederte Gabeln und Dämpfer müssen
vor dem Gebrauch unbedingt mit dem
korrekten Luftdruck befüllt werden. Dazu
haben wir deinem YT eine Dämpferpumpe
miteingepackt. Wie’s geht, erfährst du in
den beigelegten Hersteller-Manuals.
a
b
c
d
Summary of Contents for RTFM JEFFSY
