YSI YSI 556 MPS, Set-Up, Operation & Calibration

Page: 51 / 68

Logging Data With a Site List
•
Use the arrow keys to highlight the Log one
sample selection on the run screen if only a
single sample is being logged.
•
OR Use the arrow keys to highlight the Start
logging selection on the run screen if a data
stream is being logged.
•
Press the Enter key. The Pick a site screen is
displayed. Use the arrow keys to highlight the
site of your choice.
•
Press the Enter key to start logging.
•
If a single point is being logged, the header on
the run screen changes momentarily from
Menu
to Sample logged to confirm that the point was
successfully logged. See . Skip to Step 9.
•
If a continuous stream of points is being logged,
the start logging entry in the run screen changes
from
Start logging to Stop logging .