YSI YSI 556 MPS, Set-Up, Operation & Calibration

Page: 50 / 68

Logging Data Without a Site List
•
Use the keypad to enter a site description name.
•
Press the Enter key to input the site description.
•
NOTE: If you want to change the logging setup,
such as sampling interval or storing the
barometer reading, use the arrow keys to
highlight the
Configure field, press the Enter
key.
•
Use the arrow keys to highlight the OK field in
the center of the information screen.
•
Press the Enter key to start logging.
•
If a single point is being logged, the header on
the run screen changes momentarily from
Menu
to Sample logged to confirm that the point was
successfully logged.
•
If a continuous stream of points is being logged,
the start logging entry in the run screen changes
from
Start logging to Stop logging .