YSI YSI 556 MPS, Set-Up, Operation & Calibration

Page: 23 / 68

Conductivity
•
Use the arrow keys to highlight the
Conductivity selection.
•
Press Enter. The Conductivity Calibration
Selection Screen is displayed.
•
Use the arrow keys to highlight the Specific
Conductance selection.
•
Press Enter. The Conductivity Calibration
Entry Screen is displayed.
•
Place the correct amount of conductivity
standard into a clean, dry or pre-rinsed
transport /calibration cup.
•
Carefully immerse the sensor end of the probe
module into the solution.
•
Gently rotate and/or move the probe module up
and down to remove any bubbles from the
conductivity cell.