manualshive.com logo in svg

YSI EcoMapper, Manual, Page: 30 / 118

Share
Download
YSI EcoMapper Manual Download Page 30

29

3.622 GUI (Graphical User Interface)

The GUI tab allows you to alter some of the visual cues presented in VectorMap as well as several viewing options. You 

may change the color of any number of visual components.

• 

•  Background                            • Outer Park Circle     

•  WP Font Color                      • Inner Park Circle

•  Main Mssn Line:                     • Sonar Range Box

•  Selected WP                           • Multibeam Range Box

•  Overlay Mssn Line:               • WP Success

•  Overlay Mssn WP                    • DVL Vector

•  Overlay Mssn WP 

•  Mssn Power Reserve

•  Vehicle Unreachable

•  WP DFS 

•  WP HFB 

•  WP Spiral Dive

•  WP Undulate Dive

•  Tooltip Font

•  Tooltip Background

•  Mssn No Power

•  Overlay Log Line

The ‘Colors’ section allows you to easily change the color of a 

number of display items for easy recognition.

1.  Click on the color swatch associated with the desired 

change.

2.  Select the desired color from the palette.

3.  Click ‘OK.’

VectorMap also offers a variety of viewing options. To activate an option, click the checkbox next to the desired choice.

or select the appropriate option from the dropdown menu.

•  Map Fast Pan                         • Draw Multibeam Range Box       • 

Dropdown box: Sonar Range Box Pattern

•  Map Double Buffering         • Show WP Success                             Select darkness of sonar range box.

•  Map Antialising                    • Show Parking Radius                    • 

Dropdown box: Multibeam Range Box Pattern

•  Draw Sonar Range Box                                                                       Select pattern of multibeam range box.

3.623 Lawnmower

The ‘Lawnmower’ tab allows you to alter all default values 

of the 

automatically-generated grids in VectorMap. You may also 

choose to manually edit these WPs after you generate the 

grid.  Please refer to section 3.1 “Generate Lawnmower 

Search” for definitions and information on the settings in 

this section.  Also refer to section 3.34 “Side-Scan Sonar” for 

more information on sonar settings.

3.6

Summary of Contents for EcoMapper























































































































Reviews:

No comments