manualshive.com logo in svg

Ypsomed YpsoPump, User Manual

Share
Download
Ypsomed YpsoPump User Manual Download Page 36

36

You can adjust the time of day and the date at any time in the settings 
menu. If you select an impossible date (e.g. 2017-02-30), the confirma-
tion icon will be inactive (gray) and you cannot confirm the date.

10/11: 

After setting the time of day, 

set the current date (year, month, 
day). Confirm your setting by  
tapping  .

Setting the date

11/11: 

The status screen appears. 

The insulin pump is in stop mode.

To complete the putting into operation 
of your insulin pump, please program 
both basal rate profiles following the 
steps on page 38, insert a cartridge 
following the steps on page 95, 
prime the infusion set following the 
steps on page 99, attach the infu-
sion set to your body following the 
steps on page 103, prime the cannula 
following the steps on page 110 and 
switch the insulin pump into run mode 
following the steps on page 25.

Summary of Contents for YpsoPump













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands