manualshive.com logo in svg

Ypsomed YpsoPump, User Manual

Share
Download
Ypsomed YpsoPump User Manual Download Page 196

196

Internal rechargeable battery

The YpsoPump

®

 has an internal rechargeable battery that 

is charged by the inserted alkaline battery. If the alkaline 
battery is removed, all functions still work.

Priming procedure

The priming procedure is the procedure in which the  
infusion set is filled with insulin.

Run mode

In run mode, insulin is delivered according to the settings. 
Normally, all the functions of the YpsoPump

®

 can be per-

formed. All operable icons are active.

Self-test

The self-test is the procedure that is automatically per-
formed when the device is put into operation for the first 
time and after every return of the threaded rod. The insulin 
pump tests the functions and the operability of the visual 
signal (screen), the vibration signal and the audible signal.

Standard bolus

The standard bolus is a type of bolus in which the bolus 
amount entered is delivered immediately.

Summary of Contents for YpsoPump













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands