manualshive.com logo in svg

Ypsomed YpsoPump, User Manual

Share
Download
Ypsomed YpsoPump User Manual Download Page 140

140

7.8 Changing the battery

1/5: 

If the “Battery charge level low”  

warning appears, the insulin pump 
can still be operated for at least  
two days. Replace the battery as 
soon as possible.

2/5: 

Open the battery compartment by inserting a coin in the groove of the 

battery compartment lid and turn counterclockwise. Remove the empty  
battery from the battery compartment and dispose of it in accordance with 
your national environmental protection regulations.

If the battery compartment has remained open for more than 5 minutes and the YpsoPump

®

 is in run mode, 

an alarm is triggered. After inserting a new battery, all insulin pump settings are saved and do not have to be 
entered again.  
If the battery compartment remains open for more than 5 minutes and the YpsoPump

®

 is in stop mode, the 

insulin pump is automatically put into storage status. When changing the alkaline battery, make sure you do 
not lose the battery compartment lid.

Summary of Contents for YpsoPump













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands