Trip Text
Trip
code
Description
Gone to Sleep
-
The control system has been left inactive for a
longer period of time than the time indicated by the
Sleep Timer. An entry is made in the log each time
this occurs. The control system "wake up" again
when the joystick or a button is used.
Charging
-
The control system detects that a charger is
connected to Inhibit 1 or to in Inhibit 3. The
Battery
charger
screen is shown during charger connection.
An entry is made in the system log each time this
occurs.
If the On-Board charger is used:
•
Disconnect the charger from the AC supply.
If an Off-Board charger is used:
•
Disconnect the charger from the wheelchair.
If this error is still present when the charger is
disconnect, the joystick module may be defect.
7.4.
Diagnostics and troubleshooting for VR2 controls
WARNING!
Remove both fuses from the batteries before you change any cables, fuses
and/or modules. This way the power way is disconnected from the wheelchair.
NOTICE!
For more detailed information about VR2 Controllers, specific manuals can be
downloaded from the website: www.pgdt.com.
The number of LEDs on the battery indicator indicates the type of fault.
Troubleshooting
46
Service manual - Alex
