5.6.4.
Replace the motor of the central legrest
Preparation
See section
5.1.
Procedure
1.
Remove the seat cushion for easy access.
2.
Disconnect the motor cable.
3.
Loosen the locking screw (A).
4.
Remove the old motor (C) from the legrest
by removing screws B.
5.
Put the new motor in the legrest.
6.
Fasten the locking screw.
7.
Connect the motor cable.
8.
Make sure that the motor cable is properly
arranged. Use tie wraps.
9.
Put the seat cushion in the wheelchair.
10.
Check the functionality of the actuator.
A
C
B
5.7.
Seating system
5.7.1.
Replace the actuator of the backrest
Preparation
See section
5.1.
Procedure
1.
Remove the seat cushion for easy access.
2.
Make sure that the backrest is kept in the
upright position. For instance by placing a
support.
3.
Disconnect the actuator cable.
4.
WARNING!
Make sure that the
backrest is supported
safely to prevent it from
falling backwards.
Remove the mounting clip (B).
5.
Remove the nut (C).
6.
Remove the old actuator (A).
7.
Remove screw, washers and nut (D).
8.
Remove the mounting fork from the
actuator. The mounting fork is re-used with
the new actuator.
9.
Put the mounting fork on the new actuator.
10.
Put the new actuator into the seating
mechanism. Use a new lock nut (C) and
fasten the mounting clip (B).
A
E
D B
C
Maintenance tasks & adjustments
Service manual - Alex
31
