5.2.3.
Replace the carbon brushes
Preparation
See section
5.1.
Procedure
1.
Remove the cap (A).
2.
Remove the old carbon brush (B).
3.
Gently blow some air through the hole (to
remove any dust).
4.
Put the new carbon brush in the motor.
5.
Put the cap on the motor.
6.
Repeat steps 1 through 5 for all the carbon
brushes on the motor.
A
B
5.2.4.
Replace a drive motor
Preparation
See section
5.1.
Procedure
1.
Remove cap A.
2.
Unfold the washer (D).
3.
Remove screw B.
4.
Remove the drive wheel (E) from the motor
axle.
•
Make sure that you do not loose the
key (H).
5.
Remove the mudguard (G) for easy access.
6.
Remove the old drive motor, depending on
the drive type:
•
Standard RWD and FWD: see step 7.
•
ShortBase RWD: see step 8.
D
C B A
E
F
G
H
B
7.
Standard RWD and FWD:
a. Loosen the screws (A + C). These can be
discarded.
b. Remove the old drive motor (B).
c. Proceed with step 9.
A
B
C
Maintenance tasks & adjustments
20
Service manual - Alex
