![background image](http://html1.mh-extra.com/html/york/yhca-yhha07fsaadk/yhca-yhha07fsaadk_installation-manual_947408007.webp)
PARTS INSTALLATION
7
Indoor Unit
Outdoor Unit
- Do not installation the indoor unit
near to heat or strem
- No obstacles for installing position nearly.
- Keep good air circulation.
- Convenient to adopt measures to
reduce noises.
- Don’t install them near the door way.
- Make sure to have the distance spectfied
in the picture between the ceiling, wall,
furniture and other obstacles.
- 2 meters height from the floor.
Except the above parts provided, the other parts needed during installation you must purchase.
NOTES
Above 20CM
Above 30CM
Above 30CM
Above
12CM
Abo
ve
15CM
- If an awning is built over the outdoor unit
to prevent direct sunlight or rain exposure,
make sure that heat rediation from
the condenser is not restricted.
- Don’t place animals or plants near the installation
location because the cold and hot air out will
affect them.
- Make sure to have the distance specified in the
picture between ceiling, wall, furniture and other
obstacles.
- Stay away from heating soure and inflammable air
- The installation base and supporting frame should be
firm and secure. The unit should be at plane surface.
Number
1
5
Connecting
pipe
Assembly
Liquid side
ø 6.35 (7000-18000 Btu/h)
Parts you
must
purchase
ø 9.53 (21000-28000 Btu/h)
Gas side
ø 9.53 (7000-9000 Btu/h)
ø 12.7 (12000-18000 Btu/h)
ø 15.8 (24000 Btu/h)
Q’ty
ø 19.5 (30000 Btu/h)
Batteries
6
Remote controller
Drain pipe
Luting (Putty)
7
8
9
1
2
3
4
1
1
1
Installation plate
Plastic strip
Isolation strip
Pipe protection ring
1
2
1
1
Name of Accessories