![background image](http://html1.mh-extra.com/html/york/yhca-yhha07fsaadk/yhca-yhha07fsaadk_installation-manual_947408006.webp)
To achieve optimal performance, please note the following:
• Adjust the air flow direction correctly so that it is not directed on people.
• Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature levels.
• Close doors and windows on COOL or HEAT modes, or performance may be reduced.
• Use TIMER ON button on the remote controller to select a time you want to start your air conditioner.
• Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be reduced and the air
conditioner may stop running.
• Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
• Do not operate unit with horizontal louver in closed position.
OPTIMAL OPERATION
6
PREPARATION BEFORE INSTALLATION
• Before doing any work, check the interior power supply cord and the main breaker capacity are sufficient and the
installation area is sufficient and complies with the requirements.
• Check that the power supply available agrees with nameplate voltage.
• Electrical work, wiring and cables must be performed in compliance with national and local wiring codes and standard.
• Do not use the extension cables. In the case extended cables are needed, use the terminal block.
SELECTION OF THE LOCATION
• Select a place which provides the space around the units as shown in the diagram below.
INDOOR UNIT
OUTDOOR UNIT
CAUTION
• Do not install in a place that cannot bear the weight of the unit.
12cm
230cm
12cm
15cm
A
B
C
D
12cm
230cm
12cm
15cm
12cm
230cm
12cm
15cm
12cm
230cm
12cm
15cm
12cm
230cm
12cm
15cm
Models
07
09
12
18
24
A
B
C
D
Models
07
09
12
18
24
30cm
200cm
60cm
30cm
30cm
200cm
60cm
30cm
30cm
200cm
60cm
30cm
30cm
200cm
60cm
30cm
30cm
200cm
60cm
30cm