York YCAS0098EB, Installation Operation & Maintenance, Page: 47 / 184

47
JOHNSON CONTROLS
FORM 201.18-NM7
TEMPERATURE AND FLOWS
(ENGLISH UNITS)
MODEL LEAVING WATER COOLER FLOW AIR ON
NUMBER TEMPERATURE (°F) (GPM)
3
CONDENSER (°F)
YCAS MIN.
1
MAX
.2
MIN. MAX. MIN. MAX
0098 40 55 141 403 0 125
0118 40 55 141 403 0 125
0128 40 55 180 768 0 125
0138 40 55 141 403 0 125
0148 40 55 180 768 0 125
0158 40 55 180 768 0 125
0178 40 55 180 768 0 125
0198 40 55 180 768 0 125
0208 40 55 180 768 0 125
MODEL LEAVING WATER COOLER FLOW AIR ON
NUMBER TEMPERATURE (°C) (L/S)
3
CONDENSER (°C)
YCAS MIN.
1
MAX.
2
MIN. MAX. MIN. MAX
0098 4.4 12.8 8.9 25.4 -17.7 50
0118 4.4 12.8 8.9 25.4 -17.7 50
0128 4.4 12.8 11.3 48.5 -17.7 50
0138 4.4 12.8 8.9 25.4 -17.7 50
0148 4.4 12.8 11.3 48.5 -17.7 50
0158 4.4 12.8 11.3 48.5 -17.7 50
0178 4.4 12.8 11.3 48.5 -17.7 50
0198 4.4 12.8 11.3 48.5 -17.7 50
0208 4.4 12.8 11.3 48.5 -17.7 50
NOTES:
1. For leaving brine temperature below 40°F, contact your nearest YORK office for application requirements.
2. For leaving water temperature higher than 5.5°F, contact the nearest YORK office for application guidelines.
3. The evaporator is protected against freeze-up to -20°F with an electrical heater as standard.
NOTES:
1. For leaving brine temperature below 5°C, contact your nearest YORK office for application requirements.
2. For leaving water temperature higher than 13°C, contact the nearest YORK office for application guidelines.
3. The evaporator is protected against freeze-up to -28.8°C with an electrical heater as standard.
Excessive flow, above the max GPM,
will damage the evaporator.
TEMPERATURE AND FLOWS
(SI UNITS)
Technical Data