York YCAJ44HE8, Installation, Operation And Maintenance Manual

Page: 83 / 92

FORM 150.60-NM3
83
YORK INTERNATIONAL
OPTIONAL TAMPEPROOF ENCLOSURE
(WIRE GRILLE)
General
A wire grille tamperproof enclosure is available for the
chiller for the prime purpose of deterring unauthorized
access to components on the chiller.
Kit 475-17028-002 is the tamperproof enclosure which
consists of weather resistant steel grilles as well as the
necessary mounting hardware.
Installation
1. Refer to Fig. 35 and the associated parts list. Before
starting installation, all of the items in the kit should
be identified by comparing with Fig. 36.
2. All holes for mounting kit parts are provided in both
the chiller frame and the added supports, therefore,
it should be unnecessary to drill holes.
3. Install grilles using the proper hardware and sup-
ports. Refer to Fig. 36 and the Parts List for place-
ment of the grilles and the proper hardware required.
4. Notch grilles to suit water connection and wiring har-
nesses as needed.
5. If the High Ambient Sunshield Kit or Disconnect Op-
tion is installed, field adaption will be required where
parts of the kits interfere. Touch up exposed metal
parts to prevent rust.
Parts List
PART # ITEM QUAN. DESCRIPTION
075-02501-000 1 6 Bracket
075-02502-000 2 12 Clip (Single)
075-02503-000 3 2 Clip (Double)
025-32206-000 4 1 Grille
026-31634-000 5 4 Grille
026-33673-000 6 4 Grille
026-32207-000 7 1 Grille
021-16203-000 8 81 Scr. Tap Type “F”. 1/4 x 3/4 Lg.
021-16165-000 9 81 Wash Flat 1/4
021-16205-000 10 28 Scr. Hex Hd. 3/8 x 1-1/2 Lg.
021-16158-000 11 28 Lock Washer Spc. 3/8
021 -16139-000 12 28 Nut Hex 3/8
FIG. 35 – COMPLETE INSTALLATION
(Typical Installation Shown)
NOTE:
1. Notch grilles to suit water connections and wiring harnesses.
FIG. 36 – WIRE GRILLE INSTALLATION
LD02187
00001TG