background image

528195-YTG-I-0513

Johnson Controls Unitary Products

5

Units are tested for refrigerant charge and pressure, unit 
amperage, and 100% functionality. For the long term – All 
Predator

®

 units are painted with a long lasting, powder 

paint that stands up over the life of the unit. The paint 
used has been proven by a 1000 hour salt spray test.

Flexible Placement

 – All models and configurations 

share the same cabinet/footprint and thus the same roof 
curb. You have the flexibility to set one curb and choose 
the correct tonnage size and heating option after the 
internal loads have been determined.

To further simplify planning and installation, Predator

®

 XP 

cabinets are designed to fit your roof. With the optional 
roof curb, the unit ductwork is designed to fit around 24” 
on-center joists or between 48” on-center joists.

The drain pan can be rotated to drain to either the front or 
the rear of the unit. Additionally, the drain pan can be 
fitted to drain through the roof curb. As it is sometimes 
difficult to have a level installation, the drain pan features 
a generous slope to ensure proper drainage.

Full Perimeter Base Rails

 – The permanently attached 

base rails provide a solid foundation for the entire unit and 
protect the unit during shipment. The rails offer forklift 
access from 3 sides, and rigging holes are available so that 
an overhead crane can be used to place the units on a roof.

Easy Installation

 – Electric utility knockouts are supplied in 

the unit underside as well as the side of the unit. A clearly 
identified location is provided to mount a field supplied 
electrical disconnect switch. Utility connections can be 
made quickly and with a minimum amount of field labor.

All units are shipped with 2” throw-away filters installed.

Wide Range of Indoor Airflows

 – All indoor fan motors 

are belt-drive type providing maximum flexibility to handle 
most airflow requirements. For high static applications, 
factory installed alternate indoor fan motors are available. 
With the optional indoor fan motor, all units can supply 
nominal airflow at a minimum of 1.5” ESP.

Warranty 

- All models include a 1-year limited warranty 

on the complete unit. Compressors and electric heater 
elements each carry a 5-year warranty.

Factory Installed Options

YORK

®

 offers several equipment options factory installed, for 

the Predator

®

line.

Optional Factory Installed Economizers

 - Predator units 

offer a variety of optional factory installed economizers 
with low leak dampers. The outdoor air enthalpy sensor 
enables economizer operation if the outdoor enthalpy is 
less than the setpoint of the economizer logic module. See 
economizer options section to determine the correct 
economizer for your application.

Downflow Economizer 

(With barometric relief) 

The economizer is provided with a single enthalpy input. 
The economizer is 2% low leakage type, and is shipped 
installed and wired. The installer needs only to 
assemble and mount the outdoor air hood (Provided). 
The economizer has spring return, fully modulating 
damper actuators and is capable of introducing up to 
100% outdoor air. As the outdoor air intake dampers 
open, the return air dampers close. The changeover 
from mechanical refrigeration to economizer operation is 

regulated by the standard single enthalpy input. There is 
an optional input dual dry bulb available. To meet 
regulated air standards, the economizer control accepts 
an optional CO

2

 

input for

 

demand ventilation. With 

single enthalpy input, the economizer control monitors 
outdoor air. The dual enthalpy kit provides a second 
input used to monitor the return air. With a dual input kit 
installed, the economizer control compares the values of 
the two enthalpy or temperature inputs and positions the 
dampers to provide the maximum efficiency possible.

Horizontal Economizer 

(Without barometric relief) 

All features of the downflow economizer exist except you 
must order the duct mount barometric relief separately. 

You must order a 1EH0408 if you are installing a 
power exhaust. You can order a 1RD0411 Barometric 
Relief for horizontal flow economizers only.

BAS Ready Economizer -(With barometric relief) 

The economizer is provided with an actuator that 
requires a 0-10V DC input from an external source (i.e., 
field installed building automation system controller). 
Power exhaust options are available. The economizer is 
2% low leakage type with spring return and fully 
modulating dampers capable of introducing up to 100% 
outside air. Also include 2” pleated filters.

Slab Economizer for Energy Recovery Ventilators

(With barometric relief and Fresh Air Hood) 

- The 

economizer is provided with a single enthalpy input. The 
economizer is 2% low leakage type, and is shipped 
installed and wired. The economizer has spring return, 
fully modulating damper actuators and is capable of 
introducing up to 100% outdoor air. As the outdoor air 
intake dampers open, the return air dampers close. The 
changeover from mechanical refrigeration to 
economizer operation is regulated by the standard 
single enthalpy input. There is an optional input dual dry 
bulb available. To meet regulated air standards, the 
economizer control accepts an optional CO

2

 

input for

 

demand ventilation.With single enthalpy input, the 
economizer control monitors outdoor air. The dual 
enthalpy kit provides a second input used to monitor the 
return air. With a dual input kit installed, the economizer 
control compares the values of the two enthalpy or 
temperature inputs and positions the dampers to 
provide the maximum efficiency possible.

Power Exhaust (Downflow only)

 - This accessory 

installs in the unit with a down flow economizer. 

Motorized Outdoor Air Damper 

- The motorized outdoor 

air damper includes a slide-in/plug-in damper assembly 
with an outdoor air hood and filters. The outdoor air 
dampers open to the preset position when the indoor fan 
motor is energized. The damper has a range of 0% to 
100% outdoor air entry. Factory installed option or field 
installed accessory.

Alternate Indoor Blower Motor 

- For applications with 

high static restrictions, units are offered with optional 
indoor motors that provide higher static output and/or 
higher airflow, depending upon the installer’s needs.

Stainless Steel Drain Pan - 

An optional rust-proof 

stainless steel drain pan is available to provide years of 
trouble-free operation in corrosive environments.

Summary of Contents for Predator XP Series























































Reviews: