92
GLOBAL
INDUSTRIES, INC.
M36 - M48 Bucket Elevator
10230004
2015-08-31
Truss Cables
IMPORTANT NOTE: Bottom cable(s) should be tight
enough to keep the downspout straight. Top cables
should be drawn up snug!
30
install the cables
Install the cables to the arm assemblies.
Tighten the cables (see
examples A/1, B/1,
and
). Install the spouts into place.
Be certain to install the wire rope clips
following
the instructions in this manual
.
Assembly
3/8” x 1 1/4” bolt (900-00032)
and nut (900-05021)
1/2” pipe clamp welded
assembly (2)
3/8” cable clip (900-31015)
3/8” cable thimble (900-31030)
downspout
A
1
Pipe Clamp Detail
downspout
3/8” cable clamp (900-31015)
3/8” cable thimble
(900-31030)
3/8” x 1 1/4” bolt (900-00032)
and nut (900-05021)
1/2 pipe clamp
welded assembly
1/2”
[13 mm]
x 6”
[152 mm]
turnbuckle
(use on end of spout with easiest
access from bin top, service
platform, ground, etc. so turnbuckle
can be adjusted.) (900-31023)
B
1
Pipe Clamp Detail