York M36, Manual, Page: 80 / 106

80
GLOBAL
INDUSTRIES, INC.
M36 - M48 Bucket Elevator
10230004 2015-08-31
Stackable Leg Sections
NOTE: Use a bead of caulking at all flange connections
including the leg-to-boot connection.
20
make stackable leg sections
Follow the stacking drawing for this
elevator (the plans sent with the order
acknowledgement). Refer to this stacking plan
and begin connecting legs to legs (example a)
to build the pre-planned stackable leg sections.
Assembly
b) Typical Guy Wire Bracket Installation
GUY
WIRE
LEG
SECTION
GUY WIRE
BRACKET
LEG
FLANGE
CABLE
CLAMP
a) Connect Leg Sections (Leg Connection)
LEG SECTIONS
LEG FLANGE
3/8” BOLT AND
NUT - typical for
all holes
SPACER
ANGLE
(one placed
on each side
as shown)
3/8” bolt
3/8” nut
21
install guy wire brackets
Follow the stacking drawing for the particular
elevator you are building and the guy wire
section in this manual (on pages 28 - 32 ) to
place guy wire brackets at pre-planned leg
connections ( previous page and page 32 ).
NOTE: When completed the elevator should
have one guy wire bracket per every 20’
[6,096 mm] (or less) of leg section.