manualshive.com logo in svg

York M36, Manual, Page: 83 / 106

Share
Download
York M36 Manual Download Page 83

83

GLOBAL

INDUSTRIES, INC.

M36 - M48 Bucket Elevator 

  10230004

2015-08-31

Belt and Buckets

 

23 

install the buckets to the belt

At any point during the construction process 

the buckets can be fastened to the belt. Use 

the pre-punched holes in the belt to attach the 

buckets 

(examples a and b)

. Tighten the nuts 

so the head draws flush with the belt surface.

 

24 

thread belt assembly into elevator

Remove the inspection cover door. 

(Do not do 

this if winds exceed 20 mph!)

 From the top 

of the elevator, thread a rope down the leg to 

the point where the inspection door is located. 

Fasten the rope to the assembled belt. Using a 

come-along pull the belt through the inspection 

opening to the top of the leg, wrap it over the 

head pulley and thread it down the other leg.

Assembly

FLAT HEAD 

BOLT

FLANGE NUT

a) Steel Bucket Installation

FLAT HEAD 

BOLT

NUT

FLAT WASHER

LOCK WASHER

b) Plastic Bucket Installation

i

 IMPORTANT NOTE: Allow the belt to hang over 

the head pulley for 24 hours. This will remove much 

of the belt slack.

Summary of Contents for M36











































































































Reviews:

No comments