YPP6830 Pulse Input Rate/Totalizer
Instruction Manual
88
OPERATION
Front Panel Buttons Operation
Symbol
Description
MENU
•
Hold the
Menu
Through-Glass button when in power save
mode (display will show
) to awaken Through-Glass but-
tons.
•
Press the
Menu
button to enter Programming Mode.
•
Press the
Menu
button during Programming Mode to return
to return to the previous menu selections.
•
Hold the
Menu
button for 1.5 seconds at any time to exit
Programming Mode and return to Run mode.
•
Press and hold the
Menu
button for 3 seconds to access the
Advanced
features of the meter.
•
Press the
Right
arrow button to move to the next digit or
decimal position during programming.
•
Press
Right
to go backward through most selection menus.
•
Press
Reset
to reset the total, or values displayed in the
bottom display (grand total, max, or min). Press
Enter
after
Reset
to confirm the reset.
•
Press Display
when
in Run mode to display the grand total,
again to display the maximum, and again to display the min-
imum reading since last reset. These displays will time out in
12 seconds, or press Display until
total
is displayed in the
lower display.
Press
Enter to lock this display, and disable
the 12 second time out.
•
Press the
Up
arrow button to scroll forward through the
menus, decimal point, or to increment the value of a digit.
•
Press the
Enter
button to access a menu or to accept a set-
ting.
•
Press
Enter
to lock the grand total, maximum, or minimum
value on the lower display, and disable the 12 second time
out.
•
Press
Enter
while the grand total, max, or min reading is
locked on the lower display to return to run mode.
•
Press
Enter
to acknowledge alarm (if enabled).
ENTER
DISPLAY
RESET