YOKOGAWA MY600, User Manual

Page: 46 / 70

43
IM MY600-01EN
French
AVERTISSEMENT
Ne jamais toucher le circuit testé immédiatement après la
mesure. Les capacitances stockées dans le circuit peuvent
provoquer un choc électrique. Laisser les fils d’essais
connectés au circuit et ne pas toucher le circuit de mesure
tant que la décharge n’est pas terminée.
7. After all measurements are finished, turn off the power.
Wait for the discharging to complete, and then remove
the probe from the instrument.
• When a measurement is complete, the measured
value is held. While the value is held, it can be saved
to the internal memory. For details on the memory
function, see chapter 11, “Memory Function.” The
held display is released when you operate the range
switch or start another measurement.
• Bar graph
The bar graph scale varies depending on the
selected measurement range. The measurement
range is shown at the bottom of the LCD.
Bar graph for the 500 V and 1000 V ranges
Bar graph for the 50 V, 100 V, 125 V, and 250 V ranges