YOKOGAWA FVX110, User Manual

Page: 82 / 168

<12. Parameter Lists>
12-5
IM 01S01C01-01EN
Relative
Index Index
Parameter Name Factory Default
Write
Mode
Explanation
4 2004 ALERT_KEY 1 AUTO Key information used to identify the location at which an
alert occurred. Generally, this parameter is used by a
high-level system to identify specific areas in a plant that
are under the control of specific operators to distinguish
necessary alarms only. This is a universal parameter.
5 2005 MODE_BLK AUTO AUTO A universal parameter that represents block operating
condition. It comprises the Actual, Target, Permit and
Normal modes.
6 2006 BLOCK_ERR - AUTO Indicates error status of the PID block. The FVX110
transducer block handles the following factors.
Bit 0 = An XD_ERROR has occurred
Bit 15 = Target mode is O/S
7 2007 UPDATE_EVT - AUTO Indicates event information if an event update occurs.
8 2008 BLOCK_ALM - AUTO Indicates error information if an error occurs in a block.
9 2009 TRANSDUCER_
DIRECTORY
- AUTO Parameter for storing indexes of FVX110 transducers.
10 2010 TRANSDUCER_TYPE 65535 AUTO Indicates FVX110 types.
Indicates 65535 (other) for the FVX110.
11 2011 XD_ERROR 0 AUTO Stores the most serious errors that occur in the transducer
block.
0 = No error
50 = Reset performed
100 = LCD error
12 2012 COLLECTION_
DIRECTORY
AUTO Stores the DD item ID for the first index of important
parameters in the LCD transducer block.
13 2013 NOW_DISPLAYING 0 AUTO Indicates the number that the input currently displayed on
the LCD occupies among valid inputs of information.
14 2014 DISP_TARGET_
FORCE
0 AUTO A parameter for identifying information of valid inputs that
you want to view
0: Scroll knob is active
1: No.01 in valid connection
2: No.02 in valid connection
3: No.03 in valid connection
4: No.04 in valid connection
5: No.05 in valid connection
6: No.06 in valid connection
7: No.07 in valid connection
8: No.08 in valid connection
9: No.09 in valid connection
10: No.10 in valid connection
11: No.11 in valid connection
12: No.12 in valid connection
13: No.13 in valid connection
14: No.14 in valid connection
15: No.15 in valid connection
16: No.16 in valid connection
15 2015 NO_OF_VALID_CON 0 (Soft Rev 1.02 or
earlier)
1 (Soft Rev 1.04 or
later)
AUTO Indicates how many of the 16 inputs are valid.
(Corresponds to the denominator when DISP_PAGE_
INFO is displayed.)
16 2016 VALID_CON_
SUMMARY
0xFFFF (Soft Rev
1.02 or earlier)
0x0001 (Soft Rev
1.04 or later)
AUTO Sets which of the 16 inputs are valid inputs.
17 2017 MAO_CON_
SUMMARY
0x0000 AUTO Indicates which of the 16 inputs gets MAO block values.
18 2018 ISEL_CON_
SUMMARY
0x0000 (Soft Rev
1.02 or earlier)
0x0001 (Soft Rev
1.04 or later)
AUTO Indicates which of the 16 inputs gets IS block values.
19 2019 SIM_CON_
SUMMARY
0xFFFF (Soft Rev
1.02 or earlier)
0xFFFE (Soft Rev
1.04 or later)
AUTO Indicates which of the 16 inputs gets Simulation state
values.
20 2020 BAR_GRAPH_
SELECT
0 AUTO Use to specify whether bar graphs should be displayed in
the lower field of the LCD. (16 input batch setting)
21 2021 EACH_BAR_GRAPH 0x0000 AUTO Use to specify whether bar graphs should be displayed in
the lower field of the LCD. (Each input batch setting)