YOKOGAWA FIELDEYE II Series, User Manual

Page: 69 / 112

IM 85A7C03-16E
7-6
< 7. Accessing the Video stream>
Table 7-1 “
Source functions
” which can assign to the each number in the “
Destination functions
”
(Function
number) Function name
(Fieldeye ll command set)
Description of function
0 (N.A.)
1 AUTO-ICR:ON AUTO-ICR: ON: Camera selects either an
automatic control ON or OFF for the
Color/Monochrome mode.
AUTO-ICR:OFF: Camera is locked to color
mode always, even if under low light intensity
This Selection available when NightShot is
"OFF"
2 AUTO-ICR:OFF
3 BLC:ON Backlight correction ON
4 BLC:OFF Backlight correction OFF
5 NIGHT-SHOT:ON Image(s) will be changed to Monochrome
mode compulsorily.
IR cut filter is removed (ICR-ON)
More high priority than
“AUTO-ICR:ON”
6 NIGHT-SHOT:OFF Image(s) will be changed to Color mode.
IR cut filter is on (ICR-OFF)
7 AF-FIX:ON All automatic-focus operation(s) is sealed.
Interventions or Care by automatic-focus will
be inoperative.
Instead:
PTZ actions: Focus:
Go to preset Reproduce values
which registered.
Preset tour
Manual movement
Using a current
value
8 AF-FIX:OFF Automatic-focus operates normally
9 AE-FIX:ON All Automatic Exposure controlling(s) is
sealed.
Interventions or Care by automatic-exposure
will be inoperative.
Instead:
PTZ actions: Focus:
Go to preset Reproduce values
which registered.
Preset tour
Manual movement
Using a current
value
10 AE-FIX:OFF Automatic-exposure operates normally
11 MANUAL-FOCUS Change to Manual focus mode
Focus value is fixed to a current value.
12 SHUTTER-SPD:UP Shutter Speed setting :Total 22 steps
(
→
Exposure mode will be changed to Manual)
UP: Change to a (next) faster shutter speed
DOWN: Change to a (next) slower shutter
speed
13 SHUTTER-SPD:DOWN
14 ADJUST-GAIN:UP :Total 15 steps
(
→
Exposure mode will be changed to Manual)
UP: Change to a higher Gain
DOWN: Change to a lower Gain
15 ADJUST-GAIN:DOWN
16 AE MODE:AUTO Exposure mode will be changed to Auto