YOKOGAWA FIELDEYE II Series, User Manual

Page: 13 / 112

3-2
<3. Overview>
IM 85A7C03-16E
3.2 Component Names and Functions
Model FC33 is capable of outputting image signals from the built-in camera block while performing
actions such as panning, tilting, or zooming by using it in combination with various controllers .
Figure 3.1 shows the FC33 component names.
Shade ( option )
Main case
Hood (option)
Full HDIP type is different appearance
Main nameplate
Base box*
Figure 3.1 Components ame
Table 3-1 Components function
Name Function
Base box
Equipped with a DC power supply and noise filter.
Main case
Made up of castings so that this is available in severe environmental
conditions, including the waterproof and dustproof features. Houses
main components such as the pulse motor, warm gear, and signal
processing circuit. The case is rotated by panning.
Shade (option)
Installed on the top of the main case, and protects the top from direct
sunlight.
Camera housing
Housing of camera block.
Hood (option)
Installed on the top of the camera housing, and protects the camera
from wind, rain, and snow.
Wiper (selected in basic specification)
Cleans the window glass surface. Remotely operable.
Power cable
Cable through which power is supplied to FC33U (see Section 5,
“Warning”).
Composite cable
A collection of Ethernet and Relay contact signal
Camera housing
Composite Cable:
: Ethernet and Relay connection;
: Std. length 5 m,
/L10 (option) is available.
Power cable:
→
Both types: Std. length 5 m, /L10 (option) is available
Tag plate ( TAGNO )
(option)
Wiper
(
option
)