background image

IM 701310-02E

Printing and Saving a Waveform

This section describes how to print out the displayed waveform on the built-in printer (when the /B5 option is installed) or 
save it to a storage medium. You can also print waveforms to a USB printer. 
And you can also save to the flash ATA card (PC card TYPE II) or the compact flash (using the PC card TYPE II adapter) 

 

using the installed PC card interface. You can also save to the network drive (with the /C8 or /C10 option installed).

Printing Screen Images on the Built-In Printer

 User’s manual section 12.2, “Printing Using the Built-In Printer (Optional)”

You can print the waveform exactly as it appears on screen. Before printing, follow the procedure in section 12.1 of
the user’s manual to load roll paper into the built-in printer.

Example of a Printout

 Note

If  you  press  the  PRINT  key  after  the 
SHIFT key, the PRINT menu appears.
Settings using this menu are not required 
by  this  operation  guide,  but  it  may  be 
useful  to  know  that  you  can  specify  the 
print  destination  (built-in  printer,  USB 
printer, or file) or others.

PRINT Menu

1

 

Press the PRINT key. Printing starts.

PRINT

Saving Screen Image Data to a Storage Medium

 User’s manual section 13.8, “Saving Screen Image Data”

You can save the waveform displayed on screen to a storage medium as image data.

+

1

 

Press the SHIFT key 

  (the SHIFT key lights), then press the PRINT key.

7

 

Press the PRINT key again.

  The image is saved.

3

 

Select a data format

4

 

Select a color mode.

Drive name

MENU

SHIFT

PRINT

PRINT

2

  Select File

5

 

Select a save destination medium.

6

 

Press the Open soft key to display a file list 
of the selected media.

[network]     

:Network drive (optional)

[Flash Mem   

:Internal memory

[HD] 

   

:Internal hard disk (optional)

[USB storage] 

:USB storage

[Storage Card] 

:PC card

 Working with the DL9000

Summary of Contents for DL9040 Series






























Reviews: