IM 701310-02E
Working with the DL9000
Changing the Time Axis Setting from 200 µs/div to 100 ms/div
User’s manual section 5.8, “Setting Time Axis (T/div)”
The time axis setting is the setting for the amount of time per grid division. If you lower the speed (increase the value) of
the time axis setting when in Auto or Auto Level trigger mode, the display mode changes from Update Mode (in which the
displayed waveform updates) to Roll Mode (in which the waveform scroll across the screen from right to left). Roll mode
is useful when you want to observe signals with long periods or signals that change slowly.
1
Turn the T/DIV knob counterclockwise to set the time axis setting to 100 ms/div.
Setting Time axis
Roll mode display
T DIV
Changing the Time Axis Setting from 100 ms/div to �00 µs/div
User’s manual section 5.8, “Setting Time Axis (T/div)”
The display reverts from roll mode back to update mode, and five periods worth of the waveform is displayed.
1
Turn the T/DIV knob clockwise to set the time axis setting to 500 µs/div.
Setting Time axis
Update mode display
T DIV
