IM 701310-02E
0
Working with the DL9000
Changing Waveform Display Conditions
This section explains how to split the screen, and how to change settings such as the voltage or vertical axis sensitivity
and vertical position, or the time or horizontal axis.
Changing the Voltage Axis Sensitivity Setting from �00 mV/div to 200 mV/div
User’s manual section �.7, “Setting the Scale”
1
Turn the T/div knob clockwise to set the voltage axis sensitivity to 200mV/div.
One part of the waveform goes out of view due to the
rise in the voltage axis sensitivity.
The voltage axis sensitivity setting for CH1
PUSH
FINTE
SCALE
When displaying multiple waveforms, press the
key to target CH1 for the SCALE knob.
Note
CH 1
Bringing the Waveform’s Entire Amplitude into View by Lowering the Vertical Position
User’s manual section �.3, “Setting the Vertical Position of the Waveform”
1
Turn the
POSITION knob
counterclockwise to set Position to –2.00 div.
Lowering the vertical position allows the entire amplitude of the waveform to be displayed.
The ground level mark is also moved.
PUSH
FINTE
POSITION
Note
CH 1
When displaying multiple waveforms, press the
key to target CH1 for the POSITION knob.
