manualshive.com logo in svg

YOKOGAWA AQ6370D, User Manual

Share
Download
YOKOGAWA AQ6370D User Manual Download Page 354

10-3

IM AQ6370D-01EN

Maintenance

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

Reading the Firmware from a PC

1.

 Press 

SYSTEM

. A system setup menu appears.

2.

  Press the 

MORE

 soft key repeatedly until the MORE 4/4 menu is displayed.

3.

  Press the 

VERSION

 soft key. The firmware version is displayed.

4.

  Press the 

UPDATE(NETWORK)

 soft key. The “Insert Update Files (NETWORK)” 

message appears.

5.

  Connect the PC containing the update firmware to the AQ6370D over a network.

6.

  Use a file management software on the PC to copy the update software (.upd 

extension) to the UPDATE directory of the AQ6370D internal memory.

7.

  For the remaining of the procedure, follow the steps from step 6 in “Reading the 

Firmware from a USB Memory Device.”

Note

When you update the firmware, the setup data will be initialized.
If necessary, save the setup data. For the operating procedure, see section 8.5.

10.1  Upgrading the Firmware

Summary of Contents for AQ6370D






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands