Home
/
YOKOGAWA
/
AQ6370D
/
User Manual

YOKOGAWA AQ6370D, User Manual

Share

Page: 352 / 445

YOKOGAWA AQ6370D User Manual Download Page 352

10-1

IM AQ6370D-01EN

Maintenance

1

2

3

4

5

6

7

8

9

10

11

App

Index

Chapter 10 Maintenance

10.1 Updating the Firmware

When there is a firmware update, such as when new functions are added, you
can update the firmware in the AQ6370D. Download the update firmware from the
YOKOGAWA website.
http://www.yokogawa.com/ymi/

CAUTION

• When the firmware is being updated, do not manually turn the power off. If you

do, you may not be able to start the AQ6370D.

• If there are multiple update firmware files in the USB memory device, the

AQ6370D will not be updated.

Preparing to Update the Firmware

The AQ6370D can read the update firmware (.UPD extension) in one of two ways.
Prepare the update firmware according to your environment.

• Reading the Firmware from a USB Memory Device

Create a directory named “UPDATE” in the USB memory device, and save the update

firmware (.upd extension) in that directory.

Check that the AQ6370D is not connected to a network. If it is, you will not be able to

update.

• Reading the Firmware from an External PC

Save the update firmware (.upd extension) in the external PC, and connect the PC to

the AQ6370D over a network.

Procedure

Reading the Firmware from a USB Memory Device

1.

Press

SYSTEM

. A system menu appears.

2.

Press the

MORE

soft key repeatedly until the MORE 4/4 menu is displayed.

3.

Press the

VERSION

soft key. The firmware version is displayed.

4.

Press the

UPDATE(USB)

soft key. The “Insert Update Files” message appears.

5.

Connect a USB memory device containing the update firmware to the AQ6370D.

6.

Press the

CONTINUE

soft key. A list of update firmware is displayed.

7.

The message “Please disconnect LAN CABLE and remove USB storage device”

appears. Remove the USB memory device.

Note

Do not reconnect the network cable that you removed from the ETHERNET port until the
updating is complete.

«
...
350
351
352
353
354
...
»

Summary of Contents for AQ6370D






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands