manualshive.com logo in svg

YOKOGAWA AQ6370D, User Manual

Share
Download
YOKOGAWA AQ6370D User Manual Download Page 348

9-23

IM AQ6370D-01EN

Other Operations

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

Remote Monitor

This function can be used to monitor the instrument's screen and control the instrument 
from a remote PC that is connected to the instrument through a TCP/IP port.
To use this function, you need remote monitoring software (not included). You cannot use 
the remote monitoring port to perform remote control with normal remote commands.

User Name and Password

A user name and password are required to access the instrument using this function.
Use the menu that is displayed when you press the REMOTE USER ACCOUNT soft key 
in the Ethernet setup to specify these settings. See the remote control user’s manual, IM 
AQ6370C-17EN.

MONITOR PORT 

Enables and disables the remote monitor TCP/IP port.
If you set this to OFF, the remote monitor is disabled.

PORT NO. 

This is the remote monitor TCP/IP port number. It is fixed to 20001. You cannot use this 
port to perform remote control with normal remote commands.

DISCONNECT

During remote monitoring, press this soft key to disconnect the instrument from the 
remote PC.
This soft key can only be used when the instrument is connected to a PC.

Sharing Directories

The user area directory of the AQ6370D internal memory can be shared on a PC. When 
the user area directory is shared, the files in the directory can be copied to the PC over 
the network. You cannot save files to the AQ6370D.

Firewall

This feature closes the TCP port to cut off the communication when features that use the
TCP port are set to off.

Feature Name 

Soft Key Name

Operation

Directory sharing

<FOLDER SHARING>

DISABLE: Communication is cut off (the TCP port is closed).

READ ONLY: Communication is not cut off (the TCP port isopen).

Remote monitoring

<MONITOR PORT ON/OFF>

OFF: Communication is cut off (the TCP port is closed).

ON: Communication is not cut off (the TCP port is open).

Communication interface

<REMOTE INTERFACE>

GP-IB, RS232: Communication is cut off (the TCP port is closed).

ETHERNET: Communication is not cut off (the TCP port is open)

.

Language

You can select the language for the following items from English and Chinese.
•  Soft keys
•  Titles of interrupt windows
•  Warnings and messages
• Help

9.6  Other Settings

Summary of Contents for AQ6370D






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands