manualshive.com logo in svg

YOKOGAWA AQ6370D, User Manual

Share
Download
YOKOGAWA AQ6370D User Manual Download Page 195

7-20

IM AQ6370D-01EN

  

Marker Y1 

Marker Y2 

Marker information 

Gain

NF

Note

If both markers Y1 and Y2 are turned on, the difference between the markers are displayed in 
the marker information.

When changing the analysis parameters

4.

  Continuing on from step 3, press the 

PARAMETER SETTING

 soft key. The 

EDFA-NF analysis parameter setting screen is displayed.

5.

  Move the cursor with the arrow keys or soft keys, and enter a setting value with 

the numeric key pad. To select a check box, align the cursor then press the 

SELECT

 soft key. 

6.

  Press the 

CLOSE WINDOW

 soft key. The EDFA-NF analysis parameter setting 

screen closes, and the soft key menu returns to the previous stage. 

7.

  Press the 

ANALYSIS EXECUTE

 soft key. Analysis is performed according to the 

changed parameters, and the results are displayed in a list.

 

 

   

Analysis parameter setting screen

Note

See appendix 5, “Optical Amp Analysis Function” for a description of the optical amp analysis 
algorithms and parameters. 

7.8  Optical Amp Gain and NF Measurement

Summary of Contents for AQ6370D






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands