YMGI • Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
39
CLEANING AND CARE
•
Turn the unit power off and unplug the power cord before cleaning the air conditioner. Failure to do so can result in
electric shock.
•
Never sprinkle water on the indoor unit for cleaning because it can cause an electric shock.
•
Volatile liquids (e.g. thinner or gasoline) will damage the air conditioner. Wipe the units with a dry soft cloth, or a cloth
slightly moistened with water or a mild nonabrasive cleanser.
CLEANING THE AIR FILTERS
(
RECOMMENDED ONCE EVERY THREE MONTHS)
1.
Open the air intake grille and use a Phillip’s head
screwdriver to remove the two screws.
Slide both knobs simultaneously towards center
as shown and then pull them downward slowly.
2. Remove the air filters.
Slide knobs on the back of the air intake grille
outward and remove the air filter.
Then remove three air filters on it.
3. Clean the air filter.
If filters are not dirty, you can just vacuum or wash
the air filter with clean water.
If the air filters are very dirty. Use mild detergent
and water. Leave the air filter to dry naturally in a
shady place.
Do not clean with hot water.
Do not dry over a heat source.
Do not run the air conditioner without the air filter.
The suction grille must be opened carefully, at the
air intake.
4. Place the air filters back in the unit.
Replace the air filter into its holder.
Make sure the air filter makes contact with the
filter stopper when it is replaced into its holder.
5.
Shut the air intake grille.
