YMGI • Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
13
BRIEF INTRODUCTION TO MINI SPLIT CEILING CASSETTE SYSTEM
Ceiling Mount Cassette Systems are designed for high performance, easy installation and service. Each system consists
of one or several indoor units and one outdoor unit, which are connected by one set or several sets of interconnected
refrigerant pipes and electric wires.
As shown in the following sample picture, air is drawn through the center grilles/filters and then discharged at 4 vents in
4 directions. In cooling mode, air passing through coil is cooled; in heating mode, air passing through coil is heated.
Sample Ceiling Cassette Mini Split System (For Continuous Engineering Improvement and Various Marketing
Needs and Actual Part Availability, Unit Appearance Subject to Change or Update Continuously without Prior
Notice)
The electrical and thermal power for the whole system comes from the outdoor unit. Electrical and thermal components
such as compressors and motors and heat exchange coils and others, are incorporated into the cabinet in an optimized
order. They can be either hung on the wall or installed on the ground. Once stacking or bracket kit is used, some outdoor
units can be stacked 2 or 3 units high, depending upon unit size and applications. Air is discharged horizontally, quietly
and smoothly. These units are a perfect fit in locations where installation and applications of general up-flow condensing
units are limited, such as apartments, condos, lofts, multi-families and high-rise buildings and others.
Indoor unit(s) delivers the thermal and acoustical comfort to the rooms. Air is drawn through the coil from the front or
topside and then discharged from the bottom. In cooling mode, air passing through coil is cooled; in heating mode, air
passing through coil is heated. Air is filtered or treated by the built in mechanism (washable or enzyme equipped or
electrostatic powered filter, varies from model to model), before being delivered into the room, with more than enough
comfort and care, at a wide angle (swing or not, varies from model to model).
Apartments
Offices, Restaurants, Gyms, etc.
Homes
NOTES:
Since ductless system is not designed to incorporate or use with ducted return or discharge tunnels, one single-zone unit
SHOULD NOT be used to take care of the cooling or heating load of more than one-story room. Several single-zone
ductless systems or multiple-zone ductless systems shall be proper in this regard.
These units are designed for applications at:
Residential
Light commercial
Institutional
Industrial
Commercial
Hospital
