YG125-30A Maintenance Manual
Inspection and adjustment
38
Loose the screw to disassemble the headlight.
Rotating , directly unplugging
Rotating and disassemble the bulb.
Install the new bulb in reverse order
Headlight bulb 12V55W
Position lamp bulb
Unplugging the sidelight seat
Unplugging the sidelight bulb
Taillight
、
Taillight bulb
Loosen the screws, remove the taillight lampshade
Lightly rotate taillight seat, take out the seat and
bulb.
Lightly press bulb, rotate in counter-clockwise.
Install new bulb in opposite order as below.
Taillight bulb
：
12V/9W/3W
Front and rear lamp bulb
Loosen the screws, remove the lamp lampshade
Lightly press bulb, rotate in counter-clockwise.
Install new bulb in opposite order as below.
Front and rear lamp bulb
12V10W
Steering stem bearing
Lift the motorcycle with a jack or other support with the
front wheel being apart from the ground surface, and
check whether the steering handle can rotate freely; if the
steering handle cannot rotate in balance, or has axial
looseness or jamming, adjust the front fork stem adjusting
nut.
Screw
Socket
Bulb
Wier
Screw
Headlamp UNIT
Socket
Bulb
Adjust the nut
https://www.motomanuals.net/
