YG125-30A Maintenance Manual
Fuel system
43
Removal and installation of fuel tank
Disassemble step
1.
Remove the seat
2.
Unscrew one connecting bolts
3.
Loosen the tube clamp and pull off the fuel tube
4.
Pull off the fuel pump control wire patch plug.
5.
Remove the fuel tank.
To avoid fuel line contamination, clog the joint with
fireproof fabric after pulling off the fuel tube.
Installation steps
The installation procedures are the removal procedures in
reverse order.
While installing, note that the wiring of the fuel pump
control wire shall be in strict accordance with the wiring
diagram. Avoid fuel line contamination.
Removal and installation of air filter
Refer to the section “Inspection and Adjustment—
Air
Filter”,
It is unnecessary to remove the air cleaner assy from the
frame when performing maintenance on filter element;
take out the filter element for cleaning or replacement.
1.
Remove covering, right
2.
Remove Air cleaner cover, right
3.
Take out the filter element for cleaning or
replacement.
https://www.motomanuals.net/