YG125-30A Maintenance Manual
Removal and installation of engine
49
11. Remove the gear shift pedal and left rear cover.
12. To remove the rear brake pedal
13. Pull off the engine sensor connector.
14. Remove the inlet pipe connected to the engine bolt
15. Remove the engine hanging plate.
Front suspension
16. To take out the rear fork shaft and move the rear fork
backwards:
Remove the drive chain
Remove the rear absorber and rear fork
connecting bolt;
Unscrew the nut and take out the rear fork
shaft;
Take out the rear fork backwards
Loosen the nut and remove the lower hanging
bolt.
Move the engine slowly from the right.
Installation of engine
The installation of engine is in the reverse order of
removal of engine.
During installation, note that the wiring of cable shall be in
strict accordance with the wiring diagram.
Remove the 4 engine bracket and the frame connecting
bolt
Remove the 2 front suspension bolt
Remove the 2 rear suspension bolt
https://www.motomanuals.net/
