Yingang YG125-25, Maintenance Manual

Page: 77 / 144

YG125-25 Maintenance Manual Magneto and starting system
Disassembly and assembly of left front cover
Disassemble and assemble the left front cover according to the following diagram.
Use the thread retaining adhesive LOCTITE 648 while assembling the pressure plate bolt.
Use the thread retaining adhesive LOCTITE 648 while assembling the magneto stator connecting bolt.

In case of O-ring aging, prolonging or deforming, replace it.
Notice:
Do not dent the seal surface, and do not damage the stator coil.
No Procedure Quantity Remarks
Removing order Installation is in the reverse order of removal
1 stator module 1
2 Bolt M5*27 1 Replace it with a new one as required
3 Nut M14*1.25 1
4 rotor assembly 1
5 Bolt M6x16 1
6 Magneto clamp 1
7 lightened spring washer 1
8 flat washer 1
9
disc gear cutter
1
10 needle bearing 1
11 Bolt M6*12 1
82