YG125-25 Maintenance Manual Clutch and Right crankcase cover
1.
Remove the right crankcase cover (See “Removal of
2.
right crankcase cover").
3.
Remove the clutch push rod with the clutch push rod
extractor .
4.
Use the fastening tool to clamp the primary
driving and driven gear, and remove the nut M18
and butterfly washer.
5.
Remove the clutch.
6.
Remove the clutch washer.
To install the clutch:
1.
Mount the clutch washer with the sabotage side
facing the main shaft right bearing.
2.
Mount the clutch.
3.
Mount the butterfly washer and retaining nut M18.
Note to assemble with the protruding side of the
butterfly nut washer facing outside.
4.
Use the fastening tool to clamp the primary
driving and driven gear, and screw up the retaining
nut M18 to the tightening torque of 120N.m.
5.
Mount the clutch push rod with the clutch push rod
assembler .
Clutch push rod
Nut
Washer
Clutch
Washer
Clutch
Washer
Fastening tool
Fastening tool
71
Summary of Contents for YG125-25
Page 98: ...YG125 25 Maintenance Manual Frame and exhaust system 10 Frame and exhaust system 102...
Page 130: ...YG125 25 Maintenance Manual Illumination signal system Circuit schematic drawing 134...
Page 144: ...YG125 25 Maintenance Manual Electrical System Diagram 19 Electrical System Diagram 148...
