YG125-25 Maintenance Manual Frame and exhaust system
Headlamp dimming
Before driving, check the brightness, direction, etc. of the
headlamp.
The adjustment can be made to the headlamp in the left /
right and vertical directions.
Loose the screw to disassemble the headlight.
Rotating , directly unplugging
Rotating and disassemble the bulb.
Install the new bulb in reverse order
Headlight bulb 12V55W
Position lamp bulb
Unplugging the sidelight seat
Unplugging the sidelight bulb
Replacement of turn lamp bulb
Loosen the screws, remove the lamp lampshade
Lightly press bulb, rotate in counter-clockwise.
Install new bulb in opposite order as below.
Front and rear lamp bulb12V10W
Taillight
、
Taillight bulb
Loosen the screws, remove the taillight lampshade
Lightly rotate taillight seat, take out the seat and
bulb.
Lightly press bulb, rotate in counter-clockwise.
Install new bulb in opposite order as below.
Taillight bulb
:
12V21/5W
Removal / installation of exhaust muffler
To remove the exhaust muffler:
Park the motorcycle on the plane ground with main
stand; pull off the oxygen sensor patch plug.
Screw
Taillight lampshade
Bulb
Adjusting bolt
105
Summary of Contents for YG125-25
Page 98: ...YG125 25 Maintenance Manual Frame and exhaust system 10 Frame and exhaust system 102...
Page 130: ...YG125 25 Maintenance Manual Illumination signal system Circuit schematic drawing 134...
Page 144: ...YG125 25 Maintenance Manual Electrical System Diagram 19 Electrical System Diagram 148...