Yingang YG125-25, Maintenance Manual

Page: 37 / 144

YG125-25 Maintenance Manual
Inspection and adjustment

Loose the screw to disassemble the headlight.

Rotating , directly unplugging

Rotating and disassemble the bulb.

Install the new bulb in reverse order
Headlight bulb 12V55W
Position lamp bulb

Unplugging the sidelight seat

Unplugging the sidelight bulb
Taillight
、
Taillight bulb

Loosen the screws, remove the taillight lampshade

Lightly rotate taillight seat, take out the seat and
bulb.

Lightly press bulb, rotate in counter-clockwise.

Install new bulb in opposite order as below.
Taillight bulb
：
12V/9W/3W
Front and rear lamp bulb

Loosen the screws, remove the lamp lampshade

Lightly press bulb, rotate in counter-clockwise.

Install new bulb in opposite order as below.
Front and rear lamp bulb 12V10W
Steering stem bearing
Lift the motorcycle with a jack or other support with the
front wheel being apart from the ground surface, and
check whether the steering handle can rotate freely; if the
steering handle cannot rotate in balance, or has axial
looseness or jamming, adjust the front fork stem adjusting
nut.
Suspension system
Front suspension
Make the front brake in braking state and press the front
Screw Socket
Bulb
Wier
Screw
Headlamp UNIT
Socket
Bulb
Adjust the nut
37