![background image](http://html1.mh-extra.com/html/yetter/10000-magnum-series/10000-magnum-series_assembly-instructions-manual_3400218016.webp)
16
MAINTENANCE
Lubrication
CAUTION: To help prevent serious injury or death to you or others, service
machinery on a level surface. Lower machine to ground or sufficiently
lock or block raised machine before servicing. If machine is connected
to tractor, engage parking brake and place transmission in “PARK”,
shut off engine and remove key. If machine is detached from tractor, block
wheels and use jack stands to prevent movement.
CAUTION: Do not clean, lubricate, or adjust machine while in motion.
Use grease based on NLGI consistency number and the expected air temperature
range during operation.
Use a
multi-purpose polyurea, water resistant, moderate speed, and NLGI grade
#2
grease. Other greases may be used if they meet the
NLGI performance standard
.
IMPORTANT: Some types of grease thickener are not compatible with others. Consult
your grease supplier before mixing different types of grease.
Alternative Lubricants
Conditions in certain geographical areas may require special lubricants and lubrication
practices which do not appear in the operator’s manual. If there are any questions,
consult Yetter Manufacturing Co. to obtain the latest information and reccomendations.
Part #
Description
Ounces of Grease
2987-142-L
2987-142-R
Cast closer with SharkTooth Wheel
1 oz.
10000-111-LH
10000-111-RH
Main Arm, Magnum Assembly
18 oz
Storing Lubricants
Your machine can operate at top efficiency only if clean lubricants are used.
Use clean containers to handle all lubricants.
Store them in an area protected from dust, moisture, and other contaminants.
Summary of Contents for 10000 Magnum Series
