Yetter 10000 Magnum Series, Assembly Instructions Manual

Page: 14 / 48

14
MAINTENANCE
Practice Safety
Understand and practice safe service procedures before doing work. Follow ALL the
operating, maintenance, and safety information in the equipment operator’s manual.
Clear the area of bystanders, especially small children, when performing any
maintenance or adjustments. Keep work area clean and dry. Use adequate lighting for
the job. Use only tools, jacks, and hoists of sufficient capacity for the job.
Never lubricate, service, or adjust a machine while it is moving. Keep hands, feet, and
clothing free from power-driven moving parts. Disengage all power and operate controls
to relieve pressure. Lower equipment to the ground and stop the engine. Remove the
key. Wait for all moving parts to stop before servicing, adjusting, repairing, or
unplugging.
Securely support any machine elements with blocks or safety stands that must be
raised for service work.
Keep all parts in good condition and properly installed. Fix damaged equipment
immediately. Replace worn or broken parts. Remove any buildup of grease, oil, or
debris from the equipment.
Make sure all guards and in place and properly secured when maintenance work is
completed.